How to Fix Odin Flash Write Failure

One issue that you may run across when using Odin to flash your Samsung device is the "Flash Write Failure" error. It can be annoying because you may have tried multiple times to try and fix this issue, but you can't and every attempt at flashing your Samsung is unsuccessful. This article will show you how to fix this issue.




Tip 1. General Prerequisites You Need to Know


Tip 2. Restore to Factory Settings before Flashing


Tip 3. Download the Latest Odin Version


Tip 4.Try Some Other Flashing Tools with More Ease


4.1. SP Flash Tool - MediaTek Devices only


4.2. Fixppo Repair Tool - Recommended
General Prerequisites You Need to Know

Before you advance within this article, you should make sure that you have completed these steps before trying to flash your device using Odin. These are simple and should be completed before attempting to flash your Samsung.


Charge Battery - Make sure that the battery on your phone is not completely dead. Charge it up to a percentage that will keep your phone out of battery saving mode (above 30% is a minimum recommendation).


Disable Antivirus - Your PC could be detecting Odin and/or your phone as a threat to your PC. When you download the firmware that you would like to flash on your device, if it is not detected as malicious or suspicious by your antivirus, then disable your antivirus. This is because you know that the firmware that you will be using is not malicious. Then try to flash your device again.


Accessories - Disconnect any accessories that you have been using with your Samsung, such as SD cards, SIM cards, and headphones before attempting to flash the device. These could potentially interfere with the flashing process and therefore cause a "Flash Write Failure" error.
Restore to Factory Settings before Flashing

Flashing your Android phone will automatically restore the device to factory settings so make sure you make a backup of your important data before flashing. However, occasionally you could get the "Flash write Failure" issue if your device has some data on it. You may need to factory reset the Android and then attempt to flash it using Odin.




Boot your device into recovery mode.


Navigate to "wipe data/factory reset" using the volume buttons.


Use the power button to select this and confirm your option.


Wait until all the data has been removed (this could take a while).


Restart the device and then attempt to flash your Samsung.
Download the Latest Odin Version

You may have installed Odin a while back and are trying to flash your Samsung whilst using this older version. However, it is best if you use the latest version of Odin. As newer versions are released, the support for different devices increases. Furthermore, any bugs and issues present in older versions are removed as the developers find them. Simply go onto the Odin website, download the latest version and then install it on your PC.


Try Some Other Flashing Tools with More Ease
SP Flash Tool - MediaTek Devices only

An alternative tool to Odin for devices with a MediaTek chipset is to use the SP Flash Tool. This can be used similarly to Odin however it is a little more difficult to use. For an in-depth tutorial on how to use this tool, you can refer to an instruction guide on Google however this article will give you a basic rundown on how to use the SP Flash Tool.Also Read:Download & Save YouTube Videos to iPhone/iPad

Also Read:Hide Your Text Messages






Download and extract the ROM that you would like to flash on your device if you haven't already.


Download and extract the SP Flash Tool on your PC.


Open the "flash_tool.exe" file and then locate the "Download" tab within the program. Ensure that you are on this tab.


Click on the "choose" button which is on the line that says "Scatter-loading File", locate and then select the scatter .txt file under the Firmware folder for your downloaded ROM.


Choose the download button and then connect your device.

As mentioned previously, this is only a brief method on how to use the SP Flash Tool when using Odin. For a full guide on how to successfully flash your Android using the SP Flash Tool for MediaTek devices, search for it online.
Tips:
Recover Photos, Videos, Contacts, Messages, Notes, Call History & Calendar from iPhone. Recover Lost or Deleted Data from Your iPhone in Just a Few Clicks. Free Download Now. Download Free Trial Now. Do-It-Yourself Software. 3 Million+ Happy Customer.
Also Read:h33t proxy

iPhone Passcode Changed Itself! No Worries [Solved]

Questions

“My iPhone passcode changed itself when I updated to the latest version of iOS, and all of the sudden its asking for six-digit security code to unlock the iPhone. But I never had a six-digits security iPhone passcode.”

“iPhone 6S here. I restarted and pump...My code doesn’t work. Just got the answer ‘That cannot happen!’ from Custome service. Anyway my phone is locked now. Why iPhone passcode changed itself? Don’t know how to do.”

We got similar questions -- all about the problem that iPhone passcode changed itself. For this, we write this post as a guide for readers to solve it.

 

Part 1. Why is My iPhone Passcode Changed Itself?

As part of its drive to increase security, since the launch of iOS 9, Apple now and ever requests a six-digit passcode instead of a four-digit one when setting up a new or newly updated iPad or iPhone. When we update the iOS version, or restart the phone, then it is possible that iPhone passcode change itself from a four-digit code to six-digit, or the reverse. This can be resulted from the data corruption, bugs of the apps, that someone changed your phone code, the security measure of Apple, or purely, an error of the phone itself.

One certain thing is that Apple won’t change our iPhone passcode as they don’t have it. When going to custom service we are likely to get the answer “It is impossible to happen!” However, we need to solve this issue. If you enter the wrong passcode too many times, you will see a message that your device is disabled. You’ll need use iTunes and erase your device which deletes all your data, unless you made a resent backup. Or you can also try the ultimate solution to unlock without limitations.

Part 2. Try These Tips If iPhone Passcode Changed Itself

#1. iPhone Passcode Changed Itself? Use iTunes

If iPhone passcode changed itself, you can factory reset your phone and restore it with iTunes. This can be useful if your computer has been synced with your iPhone before so you don’t need the passcode to enter iTunes. If you performed a recent backup of your iPhone, iPad, iPod before this operation, that would be so nice.Also Read:iPhone games of 2019

Also Read:Microsoft Compatibility Telemetry High Disk in Windows

You can use the following procedure to rest the passcode with iTunes. Steps:

• Open the iTunes of your Mac or PC.
• Connect your iphone, iPad or iPod to your computer. When your device is connected, force restart it.
• You’ll be see two options neither to Restore or to Update. Click on the option “ Restore iPhone ”.
• When the downloading process finishes, you can set up and use the phone.

Note:

1. If you want to save the information on your iPhone, iPad, or iPod, make a backup.

2. If the downloading process lasts more than 15 minutes, force restart again.

3. If you don’t have a synced commputer but you know the Apple ID, you can also go to "iCloud.com > Find My iPhone", and then erase your device.

Also Read:Fix Whea Uncorrectable Error in Windows 10

Also Read:Error “There Was a Problem Resetting Your PC” Windows 10

Apple has started selling refurbished versions of the 2019 MacBook Air

Apple has started selling refurbished versions of the 2019 MacBook Air and base model of the 13-inch MacBook Pro with Touch Bar in the United States via its online store.

Both these MacBooks were launched by Apple in June this year. The MacBook Air update had introduced True Tone support along, an updated Butterfly keyboard, and a $100 lower price tag. Prices for the refurbished MacBook Air starts from $1,019.

As for the 13-inch MacBook Pro, it had received a major update that saw Apple switch to a quad-core Core i5 processor, add Touch Bar and Touch ID, and more. The quad-core processor meant the base 13-inch MacBook Pro offered almost 2x more performance than the model it replaced at the same price point.Also Read:Cool Games for Teenage Girls

Also Read:Android Data Eraser Software

Pricing for a brand new unit of the MacBook Pro will start from $1,399, but it can be had for as low as $1,099 via Apple’s refurbished store. Other models are also available at a discount of around 15 percent.

All refurbished Apple products come with a standard one-year warranty. They also go through Apple’s inspection and cleaning process before being put up for sale. They are also packed in a new white box and come with all the accessories and cables.

If you are on a tight budget, you can look into buying a refurbished MacBook Air or MacBook Pro from Apple. You get a “new like” product with Apple’s support and warranty. You can even further extend the warranty on your MacBook by purchasing AppleCare+.Tips:

Recover Photos, Videos, Contacts, Messages, Notes, Call History & Calendar from iPhone. Recover Lost or Deleted Data from Your iPhone in Just a Few Clicks. Free Download Now. Download Free Trial Now. Do-It-Yourself Software. 3 Million+ Happy Customer.

➤ Buy Now